Saturday, June 30, 2018

How to Clean Teeth Like a Dentist

Oral hygiene is the foundation of good dental health. Brushing and flossing regularly is the best way to keep your Greenville smile healthy and clean. Consider this your personal tutorial on the art of dental hygiene, orthopedic surgeon doctor Peoria Arizona , instructed by Dr. Bean and the expert hygienists at Complete Dental Care. If you have any questions or would like to test your skills in person, feel free to give us a call!

Toothbrush, Toothpaste, Floss, and Mouthwash

Before we get to talking technique, we need to make sure you have the right tools for the job. You’re going to need a toothbrush, fluoride toothpaste, and floss. Pick whatever floss is most comfortable for you and any toothpaste that you like, provided it has fluoride. Mouthwash is not required, but some Greenville folks really like the extra oral health boost you get from a good swish and gargle.

How do you pick a good toothbrush? Here are the basics:

Always go with soft bristles. Medium or hard bristles can damage enamel. Choose a brush that fits your mouth. The head of the brush should be small enough to reach all the way behind your back teeth and fit comfortably in your mouth and hand. Electric toothbrushes are fine, but you can achieve the same results with a regular toothbrush if you know how to brush like a pro. Remember to get a new toothbrush every 3-4 months, every time you get over a cold, or whenever the bristles start to look mangled Floss Like a Boss

Dr. Bean reminds us to floss before brushing. That way you can ensure that the particles and bacteria unearthed during flossing will be removed during the expert brushing session that follows. Make sure to floss at least once a day.

Here’s how to floss:

Wrap about 18 inches of floss around your two index fingers, with most of it on one finger. Work the floss in between two teeth, wrap it around the back tooth and work it up and down several times. Then, repeat with the front tooth.

Make sure you don’t “snap” the floss, because this can injure your gums. As you get to each tooth, let out a little more floss and wrap it around the finger picking up slack. This way, you won’t put the nasty stuff from one tooth back between two other teeth. Expert Brushing Techniques

It’s that time. We’ve talked toothbrushes, floss, and toothpaste, so now it’s time to teach the fine folks of Greenville how to brush like a dentist. Here we go!

Brush at least twice a day. The best times are right after breakfast and right before bed. Don’t overdo it on the toothpaste. You only need a pea-sized dollop. Any more than that will make your mouth unpleasantly foamy and increase your chances of swallowing fluoride, which not good for your health. Brush for at least two minutes. The most common mistake is not brushing long enough. Using a stop watch, hourglass, or a just humming a song can help you stay on track.

Start with your brush on your gum line at a 45-degree angle. Brush up and down and/or in a circular motion, but NOT across. Don’t brush too hard! Brushing harder doesn’t make up for not brushing long enough. In fact, brushing too hard can damage enamel and even injure gums enough to cause recession. Make sure to brush all surfaces of your teeth – that means front, back, sides, corners, and chewing surfaces. If you divide your brushing time into 30 seconds for each side of the upper and lower teeth, you stand a much better chance of covering all of your bases.

Brush your tongue. The worst of bad breath-causing bacteria live on your tongue. Rinse out your mouth, rinse off your brush, use a little mouthwash if you like, and pack it in. Pat yourself on the back for brushing the right way and giving yourself the excellent oral care you deserve!

Deep Cleaning Your Teeth: When To Do It

Deep cleaning your teeth might sound like something you should do after you've missed a few visits to the dentist or eaten a particularly sticky, messy meal. A deep cleaning is actually a specific procedure performed by your dental hygienist to treat gum and periodontal disease, dentist Mill Creek Washington .
 It's often completed because a person has not had regular professional cleaning appointments every six months.

The Need for Deep Cleaning


When going to the dentist, the dental hygienist will use an instrument called a probe to measure the area around your teeth to see if you have any pocketing (area between the tooth and gum where bacteria will form). The depth of the gum tissue between the teeth and gums are called pockets when it is five millimeters or more. The American Academy of Periodontology recommends that every adult receive a periodontal evaluation each year to determine whether additional treatment is needed. Measuring pocket depth is just one part of a comprehensive dental evaluation.

Ideally, normal healthy pockets will be no more than 3 millimeters deep, according to the National Institute of Dental and Craniofacial Research (NIDCR). If the pockets are greater than 5 millimeters, your dentist might prescribe a deep scaling and root planing appointment with the dental hygienist.

Deep Cleaning Process


Deep cleaning is also known in the dental world as scaling and root planing. Scaling involves removing plaque and tartar from the surface of the teeth and from the pocket area between the teeth and gums, according to the NIDCR. The dental hygienist can perform scaling and root planing using either electriceor ultrasonic instruments or manual scaling tools.

The other part of deep cleaning is root planing. The dental hygienist will use a scaling instrument to remove plaque and tartar from the surface of the roots of your teeth. A scaling and root planing procedure will require a minimum of two visits as an appointment. A follow-up visit may be necessary to confirm that your gums and teeth are getting healthier and there is no pocket depth.

Care after Scaling and Root Planing Appointments

Ideally, after this deep cleaning appointment, the bacteria in the pockets of the teeth will be removed and in the next few weeks the gums should become healthier if the person is doing oral hygiene everyday. The optimal cleaning toothpaste your dental professional will recommend is Colgate Total toothpaste. If an additional mouthrinse is required, your dentist might prescribe an antibacterial mouthwash, such as Colgate® PerioGard®, to reduce bacteria in your mouth.

If the deep scaling and 3 month visits to the dentist aren't enough to reverse periodontal disease, seeing a periodontist for a consultation should be required and determination of future treatment in regards to surgery should be considered.

What Happens During a Teeth Cleaning?

Many people dread teeth cleanings. Between the prodding, strange noises, and occasional jaw discomfort, it’s easy to understand their apprehension. Apple Blossom Dentistry , But for most, a teeth cleaning is simple and painless.

Knowing exactly what is going on during the process can help ease your stress and allow you to better enjoy the minty-fresh results.

1. A physical exam


Most teeth cleanings are performed by a dental hygienist. Before the actual cleaning process begins, they start with a physical exam of your entire mouth.

The dental hygienist uses a small mirror to check around your teeth and gums for any signs of gingivitis (inflamed gums) or other potential concerns.

If they detect major problems, the dental hygienist might call the dentist to make sure it’s fine to proceed.



2. Removing plaque and tartar


With the small mirror to guide them, the dental hygienist uses a scaler to get rid of plaque and tartar around your gum line, as well as in between your teeth. You’ll hear scraping, but this is normal. The more tartar there is in your mouth, the more time they’ll need to scrape a particular spot.

Brushing and flossing stops plaque from building up and hardening into tartar. Once you have tartar, you can only have it removed at your dentist’s office. So if this is your least favorite part of the teeth cleaning process, the lesson is to brush and floss more often.



3. Gritty toothpaste cleaning


After your teeth are completely tartar-free, the hygienist brushes them with a high-powered electric brush. which makes a grinding noise. While it sounds scary, it’s a great way to get a deep clean and remove any tartar left behind from the scaler.

Professional cleanings use toothpaste that smells and tastes like regular toothpaste, though you can often choose between flavors. However, it has a gritty consistency that gently scrubs your teeth. If done by a professional, this polishing of the teeth is deemed safe to do twice a year. But don’t be as harsh with your teeth at home, because you’ll wear down the enamel.



4. Expert flossing


Whether you floss regularly at home or not, nothing beats an expert flossing session. Your dental hygienist can get deep between your teeth and locate any potential trouble spots where you might bleed at the gums.

This might seem pointless if you floss at home, but having a professional floss your teeth also removes any leftover plaque or toothpaste from earlier in the cleaning process.



5. Rinsing


Next, you rinse out your mouth to get rid of any debris. Your dental hygienist will usually give you a rinse that contains liquid fluoride.



6. Applying fluoride treatment


The last step of the cleaning process is a fluoride treatment. This treatment is used as a protectant for your teeth to help fight against cavities for several months.

Your dental hygienist may ask you what flavor you like best. They’ll then place the foamy gel (or sometimes a sticky paste) into a mouthpiece that fits over your teeth. It’s usually left on your teeth for one minute. Besides the foamy gel, fluoride varnish is also painted onto the teeth with a small brush. Fluoride varnish will harden when in contact with saliva, so you can eat and drink immediately after.

Other potential steps Professional teeth cleanings are scheduled twice a year, while X-rays are normally done once a year. Still, depending on what your dentist or dental hygienist observes in your mouth, they might do other exams during your visit. For children, a dentist may recommend molar sealants to help prevent cavities in hard-to-brush areas.

Whether you need any additional steps or not, the key is to keep going back to the dentist for regular teeth cleanings to prevent problems altogether. By understanding what’s going on in advance, you’ll feel more at ease — and maybe even look forward to these appointments.

Friday, June 29, 2018

10 Ways to Get More Snapchat Friends for Your Business

Snapchat, the instant-photo sharing site, bestfinder.me - snapchat usernames , connects people through the picture-based stories that unfold on their mobile devices. Lately, Snapchat has evolved from a teenage phenomenon to a social media platform with great reach into the young adult demographic. With daily video views increasing 400 % last year, from 2 billion to 10 billion, the site’s reach is growing exponentially.


Snapchat statistics


Like any social media site, your company’s potential reach depends on the connections you make through the site. In the case of Snapchat, that means your friend list.


Now, all of us have friends (at least, I hope you do!). But I’m not talking about getting your buddies onto Snapchat, although that’s fine. I’m talking about making connections with others — some you know and some you’ve never met in person — via Snapchat apps that can help you find others with similar likes. That includes customers, potential customers, and anyone else who might want to do business with your brand.


Although Snapchat makes it a little trickier to connect with others on their site, it’s still possible to gain followers. The following methods, techniques and tools will help you add more Snapchat friends to your connections. And the more connections you have, the more likely it is that your content goes viral. If (or should I say ‘when’?) it does, you’ll reach even more potential viewers.


1. Be a Snapchat pro before launching a follower/friend campaign If you’re new to the site, get to know its strengths and weakness, quirks and surprises before rushing to add connections. You need to have a strong Snapchat presence before sharing with others, or else you’ll waste your initial efforts building your friend list.


2. Connect your phone’s address book Open Snapchat’s app on your smartphone and connect it to your iPhone or Android’s contact book. The site will ask your permission before proceeding to connect you with any friends who are already on Snapchat.


3. Sync Facebook with Snapchat You can’t sync Facebook and Snapchat directly, but you can move your Facebook data to another place and then move it into Snapchat.


4. Share your unique Snapchat icon If you open the Snapchat app on your camera, go to the screen where you take a picture. At the top is the Snapchat icon and clicking the icon will take you to another screen that enables you to add the white or yellow ghost to a colored box. This image differs for every user, so you can think of it as your unique fingerprint on the site.


5. Share your icon in person You can also share your Snapchat icon in person. Just hold out your phone and have others swipe the image with their camera. They’ll connect directly to you via Snapchat.


6. Try the iTunes Snapchat user app iTunes offers a free Snapchat friend app called Snap Usernames that lets you search for friends on the site. AddMe is another app that lets you add both Kik and Snapchat friends. These apps make it easy to find new connections on the sites.


7. Use Instagram to encourage Snapchat followers Many Instagram users are also on Snapchat, so it’s a good idea to create Instagram teasers that encourage people to follow you on Snapchat. You can also add your Snapchat name to your Instagram bio. A direct link will make it easy for people to connect with you on both sites.


8. Offer special incentives on Snapchat Unique deals and incentives that are offered only through Snapchat and are unavailable on other platforms is a good way to generate some buzz and interest. Keeping it exclusive encourages people to sign up and follow you on the site.


9. Create the best Snapchat content you can You’ve got to have unique, interesting and creative images and video to get people interested in your Snapchat presence. If you just share the same old boring stuff, Snapchatters won’t follow you, and your content won’t get passed along. If you’re not worth following, you won’t be followed on Snapchat, period. Make it worth people’s time and effort to follow your content!


10. Change the number of “best friends” Snapchat automatically assigns “best friends” based on the people you connect with the most frequently. The site sets the limit at 3, 5 or 7. Set it for the maximum to see the most people and develop friendships with their friends, too.

Is there a way to predict satta matka number?

Yes! There are many ways to predict Satta Matka numbers. My experience with Satta satta bazar says, this is a game of numbers and involves probability to decide the winner. When you visit Satta Matka tips, you can find expert advice which offers detailed insight into how to predict and use the numbers for big wins.
If you are a bit confident in maths and knows simple additions and multiplications, you can also win big in the game of Satta Matka with tips from the best website online, that is SattaMatka tips.
Here are a few tips how you can predict the satta matka numbers online:



How To Gain Accurate and Fast Satta Results?

Any player desirous of playing Satta Matka and getting best results has to be well informed. Such information can be obtained from going through Matka result that is displayed in form of Matka charts by the gaming sites. It is, therefore, necessary for the players to know about the Satta results that can be the basis of formulating winning strategies in the game of Satta Matka.


Informative and Educative Site

The requirement for the prospective player is finding out an informative and educative site that offers all the information and tips relating to the game of satta matka. The player needs to learn about the aspects like open, close, and the Kalyan weekly Jodi. While the requirement is authentic and necessary information should be updated it can only be provided by a reputable and reliable site, like SattaMatka.tips.


Playing Satta Live


Growing popularity of the game of satta matka online can be accessed from the fact that not only Indians but also overseas gamblers are taking to online satta matka in a big way. These people are seeking information on various aspects like Kalyan weekly Jodi and the reliable and reputable gaming website is the solution for their needs.


There is no prediction, but you can easily track how to get satta number, and what is the procedure to guess satta number.Satta matka is a game started by ratan who was arrested in early 20 century, now this game is run by so many other people who earns a lot in this field. You may know all information about satta matka here Satta ka Number Nikalne ka Tarika and you can see the result here DEKHE ONLINE ALL SATTA MATKA RESULT .


v WORLD'S one of the leading SIMPLE SATTA, displaying Results for world tops Satta Matka parivar and Ratan Khatri Mumbai Satta Matka Game, we give full assurance to all users about our Satta Matka lucky number guessing that they will never get any loss or either wrong result for Satta Matka Tips on our website. Users are happy to find Hot guess for everyday Matka result There are many users who call us


v Kalyan Matka


The gamer of the Satta Matka gambling game may advise you of something such as Baccarat and it is also quite luck based. You start the game by picking 3 figures. You then add these three figures up and get the last figure of this pair.

Next, do the similar to get another set of figures. Both sets are designed down of your board and this changes your ticket.


How to Win at Poker in 4 Steps

The best poker players in the world tread a calculated path to success, and work constantly to improve their game.

boya poker , Today we’ll discuss four steps you must take to follow their lead—steps toward becoming a winning player.

Doug Polk contributed to this article

How to Win at Poker

Step 1: Pick a game type and stick to it

Specialization is key to mastering any subject.
Consider these players who have made it to the top by specializing in one game type:

Phil Hellmuth: Focused on playing live MTTs; most WSOP bracelets of all-time; achieved long-term success despite playing an unconventional style.

Doug Polk: Focused exclusively on Heads-Up No Limit for a number of years; went from the micros to being regarded as the best high stakes HUNL player in the world.

OtB_RedBaron: Became the most feared player online by focusing on 6-max cash games; has been the most profitable player in that game type for a number of years.

Each of these players devoted time and effort to single game type over a long period of time. Sure, you may see them occasionally splashing around in different games, but it is important to remember that they earned the right to do so and that they never lost focus on their chosen format.



For the rest of us, playing games without a clear edge is something we simply can’t afford to do—we can’t afford to risk our bankroll, and we can’t afford to waste time on a game type we don’t intend to specialize in.


So, pick a game type and stick to it.
And don’t be afraid to move down in stakes and play your way up. Everyone who has found long-term success has made that journey.

(Note: Ready to take your poker game to the next level? Learn expert strategies from our world-class team of coaches when you join the Upswing Lab.
Learn more now!)


Step 2: Identify and isolate your problems Before you can solve a problem with your game you need to identify what it is, and an in-depth analysis will almost certainly reveal more than one.
In order to do an in-depth analysis of your game, you will need a good sized sample of your own hands to study.



You can start by putting in some hands online at any stakes with tracking software enabled (make sure your chosen site is compatible with tracking software).
After you’ve gathered a healthy sample, go through your database and identify spots where your win-rate is bad.



Study the situations you faced carefully, both pre- and post-flop. Find spots where you weren’t certain about what to do. Ask yourself questions like:


Should I have worked in a bluff, there?

Should I have folded?

Did I play that hand well despite the result?

When looking at your stats, is there an area that stands out as particularly bad? If so, look more closely at that area to find out what mistake(s) you are making, and why you’re making them.



Finally, be honest with yourself about why you might be losing. You’ll never move your poker career forward without the courage to face problems with your game.




Step 3: Improve your weaknesses

Once you’ve identified problems with your game it’s time to find ways to fix them. Here are some suggestions:

Get coaching Finding coaching is one of the best and most effective ways to improve. A competent coach will have seen the same problems in other players’ games, and will be able to show you the best ways solve them. Note that coaching can be very expensive, however, especially if it’s one-on-one from a well-known instructor.


Find a training site

Training sites are a great option, as they offer all sorts of resources to help you become a winning player—and usually at a price far cheaper than a one-on-one coach.




If you are a small- or mid-stakes player, one of the best resources out there is the Upswing Poker Lab. The Lab offers numerous hand charts for live, online, and tournament play, with pre-flop ranges included. Additionally, there are tons of videos and learning modules created by top players, covering specific formats.

Thursday, June 28, 2018

11 Weighted Blankets That Won’t Weigh Down Your Wallet

Mosaic Weighted Blanket


Mosaic weighted blanket for adults has by far the widest and most eclectic range of fabrics on the market (Day of the Dead or Emoji anyone?). I tried their 14-pound blanket in the more subdued Dove Grey Batik cotton fabric, which measures 42 by 72 inches and costs $195.

Our review: The thinnest, least bulky of the lot, it really hugs the body and molds to your anatomy more than the others do. With less fabric, the pellets seem to touch the body more directly, giving the feel of a firm hug. Once you’re under this blanket, it’s hard to get up again — you’re too warm and snug. One possible downside: You can easily feel the inner pellets when touching the blanket, and the pellets make a bit of a noise when you shift around, like the sound a bean bag makes when you sink into it. If you’re a light sleeper (and you probably are if you’re reading this article), this could be an issue for you (or your partner).

Gravity Blanket


Think of the Gravity Blanket as the celebrity of weighted blankets. The buzzed-about bedding raised nearly $5 million last year on Kickstarter (they raised $150k on the first day). I gave their 20-pound blanket a test run (they also have a 15- and 25-pound option). It comes in just one color — metallic gray — and costs $249 a pop.

Our review: Although the heaviest blanket that I tried, it didn’t feel that way — the weight is nicely spread out, thanks to the fabric’s grid-like pattern, which evenly distributes the poly-pellets throughout. And the soft microfiber plush fleece fabric — combined with the blanket’s thickness — is luxurious and soothing. You feel a bit like a forest creature burrowing underground for the winter when under the Gravity — a good thing.

The company claims the breathable material means you won’t get too hot while sleeping, but I did find it a little warm, and ended up kicking it off during the night. It feels ideal for colder weather, but maybe not so much during the summer months. That could also be down to the heavier weight — perhaps the 15-pound blanket is a better option, depending on your own height and body weight.

Bottom line — it’s minimalist in style, extra comforting, and expensive. If you’re someone who appreciates the finer things in life, then this is the blanket for you.

Calmforter


We Tried TK Weighted Blankets - Here's What We Thought_platinum

The Calmforter (get it?) comes in just one size — 12 pounds and measuring 60 by 80 inches. It’s the most practical of the bunch (and at a cost of $179, the most affordable, too). You’ve got a choice of just five standard colors — I tried the gray. One side is a silky-soft, minky fabric, while the other has rows of raised bumps, designed as a calming tool for people who like to fidget.

Our review: If you like the idea of sleeping under a mink coat (let’s be honest, who wouldn’t?), then this one’s for you. Like the Magic Blanket, it’s on the lighter side. The company suggests folding the blanket once over if you want it to be heavier. You’re meant to tie the inside insert to the cover to prevent the insides from bunching up, but our blanket seemed to be missing some ties, so the insert did separate at times from the cover. The blanket feels roomy, a plus if you move around a lot while sleeping. And those funny bumps that are meant to calm anxiety? They actually work!

Tuesday, June 26, 2018

13 cose da sapere se vuoi fare le extension ai capelli



Sogni extension da star come quelle che aveva Miley Cyrus tempo fa?  Ecco 13 cose da sapere prima di fartele "montare". Dopo sarà troppo tardi!



1. Saranno molto difficili da pettinare. Perché hanno l'aria soffice, sembrano bellissime e uniformi come le chiome delle principesse Disney. Ma in realtà lì sotto si annidano ciuffi embeddati ad arte: vacci piano e sii molto delicata, non potrai strattonarle con pettine e spazzola come fai di solito coi capelli "normali". 

Per saperne di più

2. Saranno impossibili da districare. Puoi dire addio temporaneamente al liscio perfetto stile orientale. Preparati a un effetto gonfio e soft, da fatalona. È molto sexy;)
3. Dovrai utilizzare solo spazzole con setole morbide. Mica vorrai correre il rischio che identi possano strappare via le tue extension nuove di zecca, vero?
4. Quando li laverai non proverai quella sensazione di "setosità" dopo il balsamo. Eh sì, toccandoli ti sembrerà che ti sia passata una gallina in testa. Ma quando saranno asciutti vedrai che non passerai inosservata!
5. A un certo punto cominceranno a tirare e il tuo cuoio capelluto chiederà pietà. Quindi dovrai fartele smontare. Tranquilla, poi te le farai rimettere...
6. I tuoi capelli veri saranno indeboliti.Te lo dicono tutti quelli che vogliono farti cambiare idea. E allora tu vai subito a leggere il punto sette.
7. Prima di farle, studia un taglio medio-corto che ti vada a genio. Così ti porti già avanti per quando dovrai toglierle.
8. Indosserai i capelli di qualcun'altra. Se sei particolarmente sensibile potrebbe crearti qualche problema inconscio. L'alternativa, però, sono i capelli di origine vegetale. A te la scelta.
9. Dureranno uno o due mesi. Su col morale, nessun rimedio beauty dura in eterno! E poi, se scegli l'applicazione alla cheratina, dureranno un po' di più. Quindi avrai diverse settimane a disposizione per scegliere il tuo nuovo look corto per il post-extension...
10. Spenderai tanti soldi. È un trattamento costoso e, se sceglierai l'applicazione di extension di qualità con metodi innovativi, il prezzo salirà ulteriormente. Anche il mantenimento non sarà così indolore per il portafoglio. Ma il budget per la bellezza è sempre un ottimo investimento!
11. Potrai finalmente sfoggiare chiome da red carpet, ma alcune acconciature rimarranno un sogno: la coda alta ad esempio sarà pressochè un tabù. Beh, ti potrai sempre fare una stilosissima treccia morbida.
12. Dovrai usare uno shampoo neutro. Le extension vanno coccolate e trattate con cura. Non vorrai mica rischiare di rovinare le applicazioni, vero?
13. Ti potrai anche fare qualche ciocca blu, rosa, viola o verde. Sappi che comunque seguiranno la stessa sorte delle extension e potrai "perderle" per casa...

Monday, June 18, 2018

The best and worst appliance repair services

GE Appliances are found in more homes than any other brand. GE makes a huge collection of quality appliances for the kitchen and laundry room. They have a good service record, but do break down on occasion. When you need GE appliance repair in Scottsdale, ge refrigerator repair ,AZ or the surrounding communities, give us a call. We’ll come running with the area’s top appliance repair service.

Here’s a look at what we offer you!
GE Refrigerator Repair
Whether you have a high-end GE Profile model or something more affordable, we can get it back in service quickly and affordably. Our skilled, highly-trained technicians have the experience to solve the problem in just a few minutes and make the needed repairs – but only after discussing them with you and getting your approval. From ice maker repair to refrigeration systems to simple things like sensors or a thermostat, we’ll take care of the problem ASAP.

GE Dishwasher Repair
We fix built-in and portable dishwashers in all of the GE lines. Don’t let the dishes, pots and pans pile up; give us a call and we’ll come running with the best dishwasher repair in Scottsdale, Fountain Hills and all of Maricopa and Pinal Counties.

GE Stove, Oven, Cooktop and Range Repair
When your main cooking appliance breaks down, the menu gets pretty short. Don’t survive on microwaved pizza and fast food! Call us today and we’ll get you cookin’ again quickly with appliance repair prices you can live with.

GE Disposer Repair
Do you have a sink disposer or trash compactor that isn’t working? That makes kitchen clean a bigger hassle than it needs to be. Give us a call and we’ll get the repair done quickly, so you’ve got all the tools to reduce work and mess in the kitchen.

GE Clothes Washer Repair
Whether you’ve got a traditional washing machine or a newer front-loading clothes washer, we’ve got the skill and experience to get it back in business before you get buried by the laundry. Call us for clothes washer repair in Scottsdale and surrounding areas. Depend on us…we won’t let you down!


GE Clothes Dryer Repair
We repair all GE gas and electric clothes dryers including high-end models with steam or sanitizing heat. You won’t be hanging up loads of laundry when you trust your dryer repair to us. Call today and we’ll be on the way!
We repair all GE appliances as well as Kenmore, Samsung, LG, Whirlpool, Bosch, Amana, Hotpoint, Sub-Zero, Wolf, Viking, KitchenAid, Miele, Haier, Asko, Frigidaire, Jenn-Air and many more. Give us a chance to show you why we’re the only Scottsdale appliance repair company you’ll ever need!

Sunday, June 17, 2018

Everything You Need To Know About Plastic Mold

What is Injection Molding:

Plastic Mold , Injection Molding is a manufacturing process for producing parts in large volume. It is most typically used in mass-production processes where the same part is being created thousands or even millions of times in succession.


Injection Molding Machine

Why Use Injection Molding:

The principal advantage of injection molding is the ability to scale production en masse. Once the initial costs have been paid the price per unit during injection molded manufacturing is extremely low. The price also tends to drop drastically as more parts are produced. Other advantages include the following:
  • Injection Molding produces low scrap rates relative to traditional manufacturing processes like CNC machining which cut away substantial percentages of an original plastic block or sheet. This however can be a negative relative to additive manufacturing processes like 3D printing that have even lower scrap rates. Note: waste plastic from injection molding manufacturing typically comes consistently from four areas: the sprue, the runners, the gate locations, and any overflow material that leaks out of the part cavity itself (a condition called “flash”).
Screen_Shot_2016-03-08_at_8.04.05_AM.png
Image From Ferris.edu
A sprue is simply the channel that guides molten plastic from the nozzle of the injection molding machine to the entry point for the entire injection mold tool. It is a separate part from the mold tool itself. A runner is a system of channels that meet up with the sprue, typically within or as part of the mold tool, that guides the molten plastic into the part cavities within the mold tool. There are two principal categories of runners (hot and cold) which you can read about here. Lastly, the gate is the part of the channel after the runner that leads directly into the part cavity. After an injection mold cycle (typically only seconds long) the entirety of the molten plastic will cool leaving solid plastic in the sprue, runners, gates, part cavities themselves, as well as a little bit of overflow potentially on the edges of the parts (if the seal isn’t 100% right).
Thermoset material, such as an epoxy resin that cures once exposed to air, is a material that cures and would burn after curing if one attempt is made to melt it. Thermoplastic material by contrast, is a plastic material that can be melted, cool and solidify, and then be melted again without burning. With thermoplastic materials the material can be recycled are used again. Sometimes this happens right on the factory floor. They grind up the sprues/runners and any reject parts. Then they add that material back into the raw material that goes into the injection molding press. This material is referred to as "re-grind". Typically, quality control departments will limit the amount of regrind that is allowed to be placed back into the press. (Some performance properties of the plastic can degrade as it is molded over and over). Or, if they have a lot of it, a factory can sell this re-grind to some other factory who can use it. Typically regrind material is used for low-quality parts that don't need high performance properties.
  • Injection Molding is very repeatable. That is, the second part you produce is going to be practically identical to the first one etc. This is a wonderful characteristic when trying to produce brand consistency and part reliability in high volume production.Injection_molding_plastic prototypes design and engineering firm

What Is The Downside To Injection Molding:

Up front costs tend to be very high due to design, testing, and tooling requirements. If you are going to produce parts in high volumes you want to make sure you get the design right the first time. That is more complicated than you might think. Getting the design right includes:
  • Designing and then prototyping the part itself to specification
    • Initial prototype development is typically completed on a 3D printer and often in a different material (such as ABS plastic) than the final part will be constructed in
  • Designing an injection mold tool for an initial production round
    • Typically generating 300-1000 injection molded prototypes in the production material requires the development of an injection mold tool.
  • Refining any and all details in the injection mold tool prior to mass-production in an injection mold manufacturing plant.

Potentially negative aspects of injection molding include the following:

  • Two of the major disadvantages to injection molding are the high tooling costs and large required lead times. Tooling is almost a project in and of itself and only one phase of the entire injection molding process. Before you can produce an injection molded part you first have to design and prototype a part (probably via CNC or 3D printing), then you have to design and prototype a mold tool that can produce replicas of the part in volume. Lastly, and typically after extensive testing in both of the aforementioned stages, you get to injection mold a part. As you can imagine, all of the iteration required to get the tool correct prior to mass production requires both time and money. It is rare that you would prototype an injection molding tool. It does happen though, especially for parts that will be made in a multi-cavity tool. For example, let's say we were going to injection mold a new shampoo bottle cap. That cap would likely have threads to attach it to the bottle, a living hinge, a snap closure, and potentially some overmolding too. A company may choose to make a single cavity tool of that part to make sure all of the features will mold as desired. Upon approval, they will make a new tool, that is capable of molding, for example, 16 caps at a time. They do the single cavity tool first so if there are any issues, they don't have to pay and wait for it to be fixed 16 times for each cavity.
  • Because tools are typically made out of steel (a very hard material) or aluminum it can be difficult to make changes. If you want to add plastic to the part you can always make the tool cavity larger by cutting away steel or aluminum. But if you are trying to take away plastic you need to decrease the size of the tool cavity by adding aluminum or metal to it. This is extremely difficult and in many cases might mean needing to scrap the tool (or part of the tool) entirely and start over. In other cases you might be able to weld metal into the cavity that is undesired. 
  • Injection molding necessitates uniform wall thickness. If you were to cut a cross-section of the Panasonic mold above you would notice that the wall thickness is approximately 2-3mm thick throughout. Keeping walls from being too thick is important to prevent inconsistencies in the cooling process resulting in defects like sink marks. A good rule of thumb is to keep walls less than or equal to 4mm thick. The thicker the walls the more material you will use, the longer the cycle time will be and the higher your cost per part will be. Conversely, if wall thickness is any thinner than 1mm or so you might experience trouble filling the mold tool (resulting in gaps or short shots). Designers can compensate for this potentiality by using a material with a higher melt flow index like Nylon which is often suitable for walls as thin as 0.5mm. Different manufacturing techniques like CNC don’t require uniform wall thickness at all.
  • Oftentimes large parts cannot be produced via injection molding as a single piece. This is due to the size limitations of injection mold machines and the mold tools themselves. For example of a large injection molded part consider the shopping carts at Target. Although the machinery exists to mold very large pieces (e.g. 1000 ton presses roughly the size of a train’s caboose), using it is very expensive. For this reason, objects that are larger than a typical injection molding machine’s capability are most often created in multiple pieces. CNC machines have similar limitations regarding product size while 3D printing has even more limitations. CNC is limited to the travel and size of the bed in the milling machine while large 3D printed parts often need to be printed in multiple pieces and then bonded together.  
  • Large undercuts require experienced design to avoid and can often add costs to the project.

What Are Some of The Considerations For Injection Molding:

Before you endeavor to produce a part via injection molding consider a few of the following things:
  1. Financial Considerations
    1. Entry Cost: Preparing a product for injection molded manufacturing requires a large initial investment. Make sure you understand this crucial point up front.
    2. Production Quantity
      1. Determine the number of parts produced at which injection molding becomes the most cost effective method of manufacturing
      2. Determine the number of parts produced at which you expect to break even on your investment (consider the costs of design, testing, production, assembly, marketing, and distribution as well as the expected price point for sales). Build in a conservative margin.
  1. Design Considerations
    1. Part Design: You want to design the part from day one with injection molding in mind. Simplifying geometry and minimizing the number of parts early on will pay dividends down the road.
    2. Tool Design: Make sure to design the mold tool to prevent defects during production. For a list of 10 common injection molding defects and how to fix or prevent them read here. Consider gate locations and run simulations using moldflow software like Solidworks Plastics.
  1. Production Considerations
    1. Cycle Time: Minimize cycle time in as much as it is possible. Using machines with hot runner technology will help as will well-thought-out tooling. Small changes can make a big difference and cutting a few seconds from your cycle time can translate into big savings when you’re producing millions of parts.
    2. Assembly: Design your part to minimize assembly. Much of the reason injection molding is done in southeast Asia is the cost of assembling simple parts during an injection molding run. To the extent that you can design assembly out of the process you will save significant money on the cost of labor.

An Example (Designing For Injection Molding)

Designing a part that’s suitable for injection molding versus one that’s suitable for machining, thermal forming, or 3D printing means taking into consideration some of the differences between the various fabrication techniques and recognizing when your project is better suited to one or the other. Typical parts you might want to injection mold include joints, brackets, or housings. For example, most consumer electronic tools are made with a plastic shell (housing) that’s injection molded and used for the body of the tool.
Consider the housing for an electric drill produced by Panasonic (see below):

Screen_Shot_2016-03-08_at_8.03.43_AM.png

Picture courtesy of Panasonic

 

One of the most obvious advantages to injection molding is that the housing serves multiple purposes. First, it serves as a handle for the end user to interact with. It also acts as a receptacle for the battery and motor as well the location of various screw bosses that will be used to fasten the device together once the internal parts are assembled. In other words, injection molding is extremely effective when you need to organize a lot of internal parts within a housing. As a consequence, it’s a fantastic way to reduce the number of total parts (“piece count”). Of note, this part is also an overmolded part. For more on this process read here.
Some of the other reasons that injection molding is a good fit for this example include the fact that the drill is being produced in large volume. That is, Panasonic is creating a large number of copies of the same drill handle. Injection molding is wonderful for this kind of high volume production because the high initial costs pay the manufacturer back over time with low per unit costs. For this same reason injection molding can be a poor choice for low volume production. Additionally of note, there are some design constraints if using injection molding. For example, the part has nearly uniform wall thickness (which is important in order to avoid defects), and the part is made with a thermoplasticmaterial (allowing for solid plastic stock to be repeatedly melted for the procedure). If you were designing a part with a thermoset material then injection molding would be more nuanced. You can injection mold a thermoset material but you can only do it once. Trying to melt a thermoset plastic a second time will result in burning the material. Similarly, a part with varied wall thickness would require more attention in the mold tool design to ensure uniform cooling and to avoid defects during production.

Conclusion

Injection molding is a great technology for finished production on a massive scale. It is also useful for finalized prototypes that are used for consumer and/or product testing. Prior to this late stage in production, however, 3D printing is much more affordable and flexible for products in the early stages of design.

10 Great Websites To Help You Learn Web Development Online

Since the beginning of the web, it has been a tradition for designers and developers to share knowledge and keep learning out in the open. For that reason, there are a number of resources available to anyone who wants to learn web development from scratch. Dubai Web Development Company , Over the years, various programs have emerged which allow you to learn the basics of web development, build a portfolio, and start on your career.

Why Learn Development Online Online learning runs a bit counter to the traditional four year university program. Until a few years ago, it was close to impossible to find a web development course in a traditional college setting. In recent years, this has gotten a bit better, but learning web development still requires a lot of self-motivation.

As a still emerging field, your skills as a web developer are often evaluated by the strength of your portfolio rather than your credentials. Building up samples of work is going to be your most valuable asset in the field, and experience is paramount. This isn’t to write-off entirely the value of a proper college education. Rather, it’s to tell you that if you cannot attend a regular university, or have chosen to study something else there, then you are far from lost. A good amount of the web community are self-learners, myself included. The best way to build websites for a living is to start building websites on your own. The strength of your skills, and your own motivation, will be the strongest factors in how far you are able to take it.

Fortunately, there are lots of online resources that can help you get started. We are lucky to be working in an industry that is growing exponentially, and the skills needed are out there for you to learn. But you also will be required to drive yourself and push to complete your skill set. For those hungry to acquire knowledge, and eager to get started, there are several places where you can learn web development right away.

Treehouse learndevelopment-1
One of the leading premium online learning resources is Treehouse. Web Development Company Dubai   , The program comes at a monthly cost with two pricing tiers. It works by guiding you along various “tracks” which are meant to teach you a specific skill or programming language from beginner to advanced. In each track, you will take several courses with videos from an instructor, accompanied by structured code walkthroughs and sample quizzes to keep you on pace. Treehouse has tracks that can help with all aspects of building websites and apps, from building the most basic website with no knowledge of HTML or CSS to back-end languages and iOS app development.

Treehouse comes closer than most at replicating an actual university structure, as its tracks are highly structured and assume no previous knowledge. But it will be up to you to make sure you keep up with a course, and engage with all of the examples provided. But Treehouse also gives you access to a lot of external resources related to learning, including small workshops, a library of books and audiovisual materials, and exclusive conferences. And as you gain more experience, Treehouse also offers help with job placement and internships, which is a pretty big bonus.

Lynda learndevelopment-2

Lynda is a bit like Treehouse, in that it offers a range of video courses taught by online instructors for a monthly fee. However, rather than break things into tracks, Lynda simply gives you access to thousands of courses which range from beginner to intermediate to advanced. Lynda is not just focused on web development, and has courses on animation, photography, film, music, and even education. But Lynda’s core strength and most comprehensive course offerings are available in web design and development. To get started, you simply need to find the course you want and take it.
It will be up to you to structure your own path, but once you do, there will be a course on just about anything you can imagine. You might want to start learning a bit of basic Javascript, then dive into the fundamentals of a Javascript library like Backbone or Ember. Or maybe you want to learn some front-end development before moving to advanced WordPress theme development. Each course comes with a series of videos, and depending on the course, a few examples for you to walk through and some sample code. Instructors are vetted by Lynda, so you can be sure they are high quality.

If you’re the kind of person who likes to jump straight into things, and works best by example, then Lynda is probably the right choice for you. It will offer you a full range or learning opportunities, and you can work at whatever pace you feel comfortable with.

Udemy Udemy serves as more of a platform than a structured approach to learning. Using Udemy, instructors can set up courses which are meant to be extremely comprehensive and independent learning tracks that teach you a particular skill. Like Lynda, Udemy offers a wide range of course offerings, both in web development and related fields. The strength of Udemy courses rests on the skills of the instructor, so before taking a course there it is worthwhile to research the instructor’s credentials. 

Each course has a price, and you get unlimited access to the videos for that course, as well as a connection to the underlying Udemy student community. Like some of the other resources listed here, Udemy is more of a skills-driven website, and is best if you are trying to get started with a specific skill, like HTML5 or CSS fundamentals, rather than a start to finish solution. Udemy features a range of courses on all topics in web development, from the basics of code to building a full website using HTML, CSS, Javascript and WordPress.

Website Development

Web development is a broad term for the work involved in developing a web site for the Internet (World Wide Web) or an intranet (a private network).

Website Development Company Dubai , can range from developing the simplest static single page of plain text to the most complex web-based internet applications (or just 'web apps') electronic businesses, and social network services.

A more comprehensive list of tasks to which web development commonly refers, may include web engineering, web design, web content development, client liaison, client-side/server-side scripting, web server and network security configuration, and e-commerce development.
Among web professionals, "web development" usually refers to the main non-design aspects of building web sites: writing markup and coding. Most recently Web development has come to mean the creation of content management systems or CMS.

These CMS can be made from scratch, proprietary or open source. In broad terms the CMS acts as middleware between the database and the user through the browser. A principle benefit of a CMS is that it allows non-technical people to make changes to their web site without having technical knowledge.

For larger organizations and businesses, web development teams can consist of hundreds of people (web developers) and follow standard methods like Agile methodologies while developing websites. Smaller organizations may only require a single permanent or contracting developer, or secondary assignment to related job positions such as a graphic designer or information systems technician.
Web development may be a collaborative effort between departments rather than the domain of a designated department. There are three kinds of web developer specialization: front-end developer, back-end developer, and full-stack developer.

Front-end developers deal with the layout and visuals of a website, while back-end developers deal with the functionality of a website. Back-end developers will program in the functions of a website that will collect data.

Monday, June 11, 2018

The Ultimate List of Kitchen Tools for Healthy Cooking

It might happen slowly at first: A new, delicious chicken breast recipe requires a proper roasting pan and carefully measured ingredients.

kitchen tools  also calls for minced, diced, and julienned add-ins. (Come again?) Or it could happen all at once: Mom drops by for a surprise visit and the only things on hand are plastic cups and a jar of peanut butter.

Maybe it’s time to stop using cookbooks as coasters and instead turn to their intended purpose—which means new cooking supplies (and kitchen skills) are in order. Whether living and cooking solo for the first time or in need of a kitchen overhaul, we’ve picked the best (and most necessary) tools to wine, dine, and entertain like a pro.

Healthy Kitchen Essentials: Prep Work

1. Chef’s Knife One of the most versatile knives available, a chef’s knife allows you to chop, slice, mince, and more without switching tools. You’ll be like a kitchen Karate Kid! Tip: Look for a stainless steel variety to keep away rust.

Price range: $19.99-$99.99 Editors’ pick: Forschner by Victorinox Chef’s Knife, $39.95

2. Cutting Board The workhorse of every kitchen, there are few dinners where cutting and chopping isn’t involved—making the cutting board your new best friend. While plastic ones are inexpensive and easy to come by, wooden versions tend to be more sanitary since they lack grooves for germs to hang out in. They also help keep your knives in tip-top shape , dinnerware .

Price range: $3.99-$129.00 Editors’ pick: Kobi Michigan Maple Butcher Block Cutting Board, $44.99

3. Measuring Cups and Spoons Did Mary Poppins mean a teaspoon of sugar or a tablespoon? Either way, having measuring tools on hand is essential for following almost any recipe—or even just portioning out serving sizes. Who knew a cup of cereal was so small?!

Price range: $2.99-$39.99 Editors’ pick: Prepworks from Progressive International Ultimate 19-Piece Measuring Cup and Spoon Set, $13.37

4. Kitchen Shears This underrated tool will quickly become a favorite. Used for everything from chopping herbs and vegetables to slicing dried fruit and even meat, they make every kitchen task that much easier. Plus, who needs regular scissors when you have kitchen shears?

Price range: $2.99-$24.99 Editors’ pick: Crate and Barrel Kitchen Shears, $9.95

5. Colander Though it’s possible to drain pasta using a pot lid, the result isn’t always pretty—think pasta escaping and lids slipping. Instead, use a colander, which drains water like a pro. Bonus: Colanders make it super simple to wash fruits and veggies. Buh-bye soggy pasta; hello clean produce!


Price range: $0.99-$39.99 Editors’ pick: Cook Pro Stainless Steel Colander, $12.68

6. Can Opener There are few things worse than reaching for a can of pumpkin and realizing there’s no way to open it. (Or soup, coconut milk, beans, or anything else deliciously canned.) Though many goods have pop-tops these days, it’s always better to prepared.

Price range: $1.49-$29.99 Editors’ pick: Amco Houseworks Swing A Way Portable Can Opener, $14.68

7. Mixing Bowls Think mixing bowls are just for baking? Think again. Use them to marinate meat, dress veggies with sauce or seasoning, and make salad dressings and dips (give one of these a whirl!). Tip: Skip glass bowls that chip easily and opt for lightweight stainless steel versions.

Price range: $5.99-39.99 Editors’ pick: Pyrex Smart Essentials Mixing Bowl Set 8 piece, $23.99

8. Blender These master mixers are used to whip up smoothies, mixed drinks, soups, nut butters, sauces, and oh-so-much more. And they can do it all in a matter of seconds. How’s that for an all-in-one appliance?

Price range: $19.99-$409 Editors’ pick: Vitamix S30 Personal Blender

9. Grater The most common use of graters is shredding cheese (quesadilla, anyone?). But they’re also wonderful for cookware , zesting citrus fruit and shredding chocolate and vegetables like potatoes and zucchini. How else did you think hash browns came to be?

Price range: $0.99-$49.99 Editors’ pick: CHEFS 6-sided Stainless Steel Box Grater, $19.95

10. Whisk This funny-looking tool has many more uses than beating eggs and making whipped cream. It’s also great for mixing vinaigrettes, combining dry ingredients for baking, removing lumps from sauces and gravies, and standing in for a microphone during impromptu dance parties. (Trust us on that one.)

Price range: $0.99-$34.99 Editors’ pick: Baker's Secret Silicone Whisk, $6.49